Bendicrop 50

One cylinder working station with five work stations Exclusive from Geka. Permanent bending station complying with CE standards. Machine has an excellent performance in all its five work stations.

Bendicrop Bendicrop general
Geka Ironworkerswww.geka-ironworkers.com

Bendicrop 50

Main features

info
Angles UPN profile Flat bars  perfil H
Punching Shearing Punches Shearing 45º Shearing 45º Shearing of bars Blending Flat barsEntallado

BENDICROP 50
FEATURES << see in inches
Shearing flat bars        350 x 10 mm
(5º) 350 x 15 mm
Punching (b) Ø 31 x 12 mm
(a) Ø 28 x 13 mm
Shear of angle section L at 90º 80 x 80 x 8 mm
Bending 100 x 10 mm
Notching 90 x 42 x 10 mm
BENDICROP 50
FEATURES << see in inches
Shearing flat bars        14 x 3/8
(5º) 14 x 1/2
Punching (b) Ø 1 1/4 x 1/2
(a) Ø 1 1/16 x 1/2
Shear of angle section L at 90º 3 x 3 x 5/16
Bending 4 x 3/8
Notching 3 1/2 x 1 9/16 x 3/8

 
(a) Spain, Latin America, Denmark, Saudi Arabia and Africa.
(b) Rest of World

Specifications

One cylinder ironworker with five work stations  Exclusive from Geka

Permanent bending station  complying with CE standards.

Thanks to the blade holder's vertical movement, machine has an excellent performance in all its five work stations:

  • punching
  • notching
  • shear for flat bars
  • angle cutting
  • cutting of round and square bars

Fitted with an anti torque system to reduce deformation when shearing flat bars.

The BENDICROP model is fitted with a touch and cut length stop and is delivered with two V-shaped bending dies of 40 and 70 mm .

  1. Permanent bending station complying with CE standards.
  2. Goose neck die-holder for punching of D and E sections on legs and webs. . Quick tool change
  3. Angle shearing without loss of material. Wide range of openings for B and A .
  4. Flat bar and plate shearing system with minimum deformation F mitre shearing up to 45º.
  5. Rectangular notching with table Also suitable for tube notching, rectangular notching, etc…
  6. Anti torque system for flat bar shearing without deformation.

 

<< see in inches
FEATURES   BENDICROP 50 BENDICROP 60 S BENDICROP 60 SD BENDICROP 85 S BENDICROP 85 SD
SHEAR FOR FLAT BARS            
Flat bars (low deformation) mm 350 x 10 350 x 15 350 x 15 450 x 15 450 x 15
  mm (5º) 350 x 15 (5º) 350x15 (5º) 350x15 (5º) 450x18 (5º) 450x18
Length of blades
mm 356 356 356 475 475
Shear or one angle leg L at 45 º mm 70 70 70 - -
Working height
mm 810 859 859 868 868
SHEARS FOR SECTION IRON            
L at 90 º mm 80 x 80 x 8 120 x 120 x 10 120 x 120 x 10 120 x 120 x 10 120 x 120 x 10
L at 45 º mm - - - - -
Round Bar ø mm 35 45 45 45 45
Square bar mm 30 40 40 40 40
NOTCHING    Rectangular Triangular Triangular Triangular Triangular
Plate Thickness mm 10 10 10 12 12
Angle of
mm 100 100 100 130 130
Depth mm 90        
Width mm 42        
PUNCHING            
Punching Power kN 500 600 600 800 800
Maximum Capacity mm (A) ø 31 x 12
(B) ø 27 x 13
ø 40 x 11 ø 40 x 11 ø 40 x 15 ø 40 x 15
Throat mm 177 250 500 300 500
Working Height mm 973 1106 1106 1094 1094
BENDING ATTACHMENT            
Maximum Capacity mm 100 x 10 150 x 10 150 x 10 200 x 12 200 x 12
GENERAL SPECIFICATIONS            
Motor kW 3 5,5 5,5 9 9
nº strokes per minute   34
(stroke 15mm)
 32
(stroke 15mm)
 32
(stroke 15mm)
 40
(stroke 20mm)
 40
(stroke 20mm)
Net weight kg 1000  1390  1750  2400  2400
Gross weight
kg 1200  1598  2012  2760  2760
Packaging dimensions m 1,3 x 1,1 x 1,85 1,85 x 1,3 x 2,06 2,01 x 1,4 x 2,06  2,3 x 1,2 x 2,05  2,3 x 1,2 x 2,05
Volume of seaworthy package   m3 2,65 6,05 5  6,68  6,68
OPTIONAL EQUIMENTS            
SHEARS FOR SECTION IRONS            
U and U section iron mm 100  120  120  120  120
PIPE NOTCHING            
Maximum diameter mm 60  60  60  60  60
PUNCHING LARGER DIAMETERS            
Maximum diameter mm ø 100 x 4  ø 100 x 5  ø 100 x 5  ø 100 x 6  ø 100 x 6
<< see in mm
FEATURES   BENDICROP 50 BENDICROP 60 S BENDICROP 60 SD BENDICROP 85 S BENDICROP 85 SD
SHEAR FOR FLAT BARS            
Flat bars (low deformation) In 14” x 3/8” 14” x 3/8” 14” x 3/8” 18” x 5/8” 18” x 5/8”
  In (5º) 14” x 1/2” (5º) 14” x 1/2” (5º) 14” x 1/2” (5º) 18” x 3/4” (5º) 18” x 3/4”
Length of blades
In 14” 14” 14” 19” 19”
Shear or one angle leg L at 45 º In 2 1/2” 2 1/2” 2 1/2” - -
Working height
In 31 7/8” 33 13/16” 33 13/16” 36 7⁄32” 36 7⁄32”
SHEARS FOR SECTION IRON            
L at 90 º In 3” x 3” x 5/16” 5” x 5” x 3/8” 5” x 5” x 3/8” 5” x 5” x 3/8” 5” x 5” x 3/8”
L at 45 º In - - - - -
Round Bar ø In 1 3/8” 2” 2” 2” 2”
Square bar In 1 1/4” 1 1/2” 1 1/2” 1 1/2” 1 1/2”
NOTCHING    Rectangular Triangular Triangular Triangular Triangular
Plate Thickness In 3/8” 3/8” 3/8” 1/2” 1/2”
Angle of
In 4” 4” 4” 5” 5”
Depth In 3 1/2” - - - -
Width In 1 9/16” - - - -
PUNCHING            
Punching Power Ton 55 61 61 93.5 93.5
Maximum Capacity In (A) ø 1 1/4” x 1/2”
(B) ø 1-1/16 x 1/2”
ø 1 1/2” x 7⁄16” ø 1 1/2” x 7⁄16” ø 1 1/2” x 1/2” ø 1 1/2” x 1/2”
Throat In 7” 10” 20” 12” 20”
Working Height In 38 3/8” 43 1/2” 43 1/2” 43” 43”
BENDING ATTACHMENT            
Maximum Capacity In 4” x 3/8” 6” x 3/8” 6” x 3/8” 8” x 1/2” 8” x 1/2”
GENERAL SPECIFICATIONS            
Motor H.P. 7.5 7.5 7.5 12.5 12.5
nº strokes per minute   34
(stroke 3/4”)
 32
(stroke 3/4”)
 32
(stroke 3/4”)
 40
(stroke 1”)
 40
(stroke 1”)
Net weight Lbs 2095 3065 3850 5291 5291
Gross weight
Lbs 2530 3525 4435 4785 6084
Packaging dimensions In 51” x 43” x 73” 83” x 55” x 63” 83” x 55” x 81” 91” x 55” x 75” 91” x 55” x 91”
Volume of seaworthy package Ft3 94 166 213 217 263
OPTIONAL EQUIMENTS            
SHEARS FOR SECTION IRONS            
U and U section iron In 4”  5”  5”  5”  5”
PIPE NOTCHING            
Maximum diameter In 2”  2”  2”  2”  2”
PUNCHING LARGER DIAMETERS            
Maximum diameter In ø 4” x 5/32”  ø 4” x 3/16”  ø 4” x 3/16”  ø 4” x 1/4”  ø 4” x 1/4”

- Capacities based on a material resistance of 45 kg/mm2.
- The manufacturer reserves the right to make modifications without prior notice
 
(A) Spain, Latin America, Denmark, Saudi Arabia and Africa.
(B) Rest of World

 

CONFIGURATION BENDICROP 50 BENDICROP 60 S BENDICROP 60 SD BENDICROP 85 S BENDICROP 85 SD
L  90º
L  45º 1 legs 1 legs 1 legs 1 legs 1 legs
Flat bar
Punching
Notching
Bending
Electric Stop

 

Details

Anti torque system for flat bar shearing without deformation.
Rectangular notching with table. Also suitable for tube notching, rectangular notching, etc...
Flat bar and plate shearing system with minimum deformation. L mitre shearing up to 45º.
Angle shearing without loss of material. Wide range of openings for round and square bars.
 
Goose neck die-holder for punching of UPN and IPN sections on legs and webs. Quick tool change.
Permanent bending station complying with CE standards.
 

Brochure

Milimeters Inches

Video

Get more...

Tools


    Send by Email

    We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
    You can change the settings or get more information here.

    Copyright © 2011 Maquinaria GEKA S.A. All rights reserved.
    Maquinaria GEKA S.A. - Poligono Zerradi 1 - 20180 Oiartzun (SPAIN) - TEL: +34 943 490 034