Bendicrop 85

Metal fabricators and construction companies often have to perform simple bending operations. GEKA has developed the BENDICROP 85 SD model which, in addition to the cutting, punching and notching stations.

Banner
Geka Ironworkerswww.geka-ironworkers.com

Bendicrop 85

Main features

info
Angles UPN profile Flat bars perfil H
Centering Punching Shearing Punches Shearing 45º Shearing 45º Shearing of bars Blending Flat bars Entallado

BENDICROP 85
FEATURES << see in inches
Shearing flat bars        450 x 15 mm
(5º) 450 x 18 mm
Punching Ø 40 x 15 mm
Shear of angle section L at 90º 120 x 120 x 10 mm
Bending 200 x 12 mm
Notching
130 x 130 x 12 mm
BENDICROP 85
FEATURES << See in mm
Shearing flat bars        18 x 9/16
(5º) 18 x 7/8
Punching Ø 1 9/16 x 1/2
Shear of angle section L at 90º 5 x 5 x 9/16
Bending 7 3/4 x 9/16
Notching 3 1/2 x 2 x 9/16

Specifications

Metal fabricators and construction companies often have to perform simple bending operations. GEKA has developed the BENDICROP 85 SD model which, in addition to the cutting, punching and notching stations, holds a permanently fitted bending station with a capacity of up to 200x15 mm. Geka’s exclusive Bendicrop 85 SD is a dual cylinder machine with 5 working stations:

  • Punching station. More powerful, 500 mm extended throat
  • Flat bars shearing
  • Bending station
  • Triangular notching station
  • Round and square bars shearing station

Furthermore, it is fitted with a system to reduce deformation when shearing flat bars.
There are two different versions of this model: S, (300mm throat) and SD (500mm throat).

Bendicrop 85 SD comes with standard hydraulic hold down system for angles profiles and flat bar cutting stations:
It's a hydraulic special device, which guarantees that the material being cut, remains perfectly static during the shearing operation.

Tope automático

 

 

<< see in inches
FEATURES   BENDICROP 50 BENDICROP 60 S BENDICROP 60 SD BENDICROP 85 S BENDICROP 85 SD
SHEAR FOR FLAT BARS            
Flat bars (low deformation) mm 350 x 10 350 x 15 350 x 15 450 x 15 450 x 15
  mm (5º) 350 x 15 (5º) 350x15 (5º) 350x15 (5º) 450x18 (5º) 450x18
Length of blades
mm 356 356 356 475 475
Shear or one angle leg L at 45 º mm 70 70 70 - -
Working height
mm 810 859 859 868 868
SHEARS FOR SECTION IRON            
L at 90 º mm 80 x 80 x 8 120 x 120 x 10 120 x 120 x 10 120 x 120 x 10 120 x 120 x 10
L at 45 º mm - - - - -
Round Bar ø mm 35 45 45 45 45
Square bar mm 30 40 40 40 40
NOTCHING    Rectangular Triangular Triangular Triangular Triangular
Plate Thickness mm 10 10 10 12 12
Angle of
mm 100 100 100 130 130
Depth mm 90        
Width mm 42        
PUNCHING            
Punching Power kN 500 600 600 800 800
Maximum Capacity mm (A) ø 31 x 12
(B) ø 27 x 13
ø 40 x 11 ø 40 x 11 ø 40 x 15 ø 40 x 15
Throat mm 177 250 500 300 500
Working Height mm 973 1106 1106 1094 1094
BENDING ATTACHMENT            
Maximum Capacity mm 100 x 10 150 x 10 150 x 10 200 x 12 200 x 12
GENERAL SPECIFICATIONS            
Motor kW 3 5,5 5,5 9 9
nº strokes per minute   34
(stroke 15mm)
 32
(stroke 15mm)
 32
(stroke 15mm)
 40
(stroke 20mm)
 40
(stroke 20mm)
Net weight kg 1000  1390  1750  2400  2400
Gross weight
kg 1200  1598  2012  2760  2760
Packaging dimensions m 1,3 x 1,1 x 1,85 1,85 x 1,3 x 2,06 2,01 x 1,4 x 2,06  2,3 x 1,2 x 2,05  2,3 x 1,2 x 2,05
Volume of seaworthy package   m3 2,65 6,05 5  6,68  6,68
OPTIONAL EQUIMENTS            
SHEARS FOR SECTION IRONS            
U and U section iron mm 100  120  120  120  120
PIPE NOTCHING            
Maximum diameter mm 60  60  60  60  60
PUNCHING LARGER DIAMETERS            
Maximum diameter mm ø 100 x 4  ø 100 x 5  ø 100 x 5  ø 100 x 6  ø 100 x 6
<< see in mm
FEATURES   BENDICROP 50 BENDICROP 60 S BENDICROP 60 SD BENDICROP 85 S BENDICROP 85 SD
SHEAR FOR FLAT BARS            
Flat bars (low deformation) In 14” x 3/8” 14” x 3/8” 14” x 3/8” 18” x 5/8” 18” x 5/8”
  In (5º) 14” x 1/2” (5º) 14” x 1/2” (5º) 14” x 1/2” (5º) 18” x 3/4” (5º) 18” x 3/4”
Length of blades
In 14” 14” 14” 19” 19”
Shear or one angle leg L at 45 º In 2 1/2” 2 1/2” 2 1/2” - -
Working height
In 31 7/8” 33 13/16” 33 13/16” 36 7⁄32” 36 7⁄32”
SHEARS FOR SECTION IRON            
L at 90 º In 3” x 3” x 5/16” 5” x 5” x 3/8” 5” x 5” x 3/8” 5” x 5” x 3/8” 5” x 5” x 3/8”
L at 45 º In - - - - -
Round Bar ø In 1 3/8” 2” 2” 2” 2”
Square bar In 1 1/4” 1 1/2” 1 1/2” 1 1/2” 1 1/2”
NOTCHING    Rectangular Triangular Triangular Triangular Triangular
Plate Thickness In 3/8” 3/8” 3/8” 1/2” 1/2”
Angle of
In 4” 4” 4” 5” 5”
Depth In 3 1/2” - - - -
Width In 1 9/16” - - - -
PUNCHING            
Punching Power Ton 55 61 61 93.5 93.5
Maximum Capacity In (A) ø 1 1/4” x 1/2”
(B) ø 1-1/16 x 1/2”
ø 1 1/2” x 7⁄16” ø 1 1/2” x 7⁄16” ø 1 1/2” x 1/2” ø 1 1/2” x 1/2”
Throat In 7” 10” 20” 12” 20”
Working Height In 38 3/8” 43 1/2” 43 1/2” 43” 43”
BENDING ATTACHMENT            
Maximum Capacity In 4” x 3/8” 6” x 3/8” 6” x 3/8” 8” x 1/2” 8” x 1/2”
GENERAL SPECIFICATIONS            
Motor H.P. 7.5 7.5 7.5 12.5 12.5
nº strokes per minute   34
(stroke 3/4”)
 32
(stroke 3/4”)
 32
(stroke 3/4”)
 40
(stroke 1”)
 40
(stroke 1”)
Net weight Lbs 2095 3065 3850 5291 5291
Gross weight
Lbs 2530 3525 4435 4785 6084
Packaging dimensions In 51” x 43” x 73” 83” x 55” x 63” 83” x 55” x 81” 91” x 55” x 75” 91” x 55” x 91”
Volume of seaworthy package Ft3 94 166 213 217 263
OPTIONAL EQUIMENTS            
SHEARS FOR SECTION IRONS            
U and U section iron In 4”  5”  5”  5”  5”
PIPE NOTCHING            
Maximum diameter In 2”  2”  2”  2”  2”
PUNCHING LARGER DIAMETERS            
Maximum diameter In ø 4” x 5/32”  ø 4” x 3/16”  ø 4” x 3/16”  ø 4” x 1/4”  ø 4” x 1/4”

- Capacities based on a material resistance of 45 kg/mm2.
- The manufacturer reserves the right to make modifications without prior notice
 
(A) Spain, Latin America, Denmark, Saudi Arabia and Africa.
(B) Rest of World

 

CONFIGURATION BENDICROP 50 BENDICROP 60 S BENDICROP 60 SD BENDICROP 85 S BENDICROP 85 SD
L  90º
L  45º 1 legs 1 legs 1 legs 1 legs 1 legs
Flat bar
Punching
Notching
Bending
Electric Stop

 

 

Brochure inches

Brochure mm

Get more...

Tools

  • Semipaxy
    Our Semipaxy product line brings the newest CNC automation and positioning technology to punching of steel. This unit is equipped with programmable stops along the X- and Y-Axis.

  • PAX
    Our PAX product line guarantees the automated positioning of material along the X-Axis permitting sequential multiple punching of profiles.


Send by Email

We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
You can change the settings or get more information here.

Copyright © 2011 Maquinaria GEKA S.A. All rights reserved.
Maquinaria GEKA S.A. - Poligono Zerradi 1 - 20180 Oiartzun (SPAIN) - TEL: +34 943 490 034