Hydracrop 55/110

Versatile and excellent price-quality balance ironworker. Two simultaneous work stations. Five work stations: punching, shear of iron section L

Hydracrop 55/110
Geka Ironworkerswww.geka-ironworkers.com

Hydracrop 55/110

Main features

info
Angles UPN profile Flat bars perfil H
Centering Punching Shearing Punches Shearing 45º Shearing 45º Shearing of bars Blending Entallado

HYDRACROP 55/110
FEATURES << see in inches
Shears for flatbar 300 x 15 mm
200 x 20 mm
Punching Ø 40 x 10 mm.
Ø 20 x 20 mm.
Shear of iron section L at 90º 120 x 120 x 10 mm
Shear for solid bars Ø 40 mm Y □ 40 mm
Rectangular notching 90 x 42 x 10 mm
HYDRACROP 55/110
FEATURES << see in mm
Shears for flatbar 12"x5/8"
8"x3/4"
Punching Ø 1 1/2"x3/8"
Ø3/4"x3/4"
Shear of iron section L at 90º 4"x4"x1 1/2"
Shear for solid bars
 Ø 1-9/16" y □ 1-9/16"
Rectangular notching 3 1/2"x1 5/8"x3/8"

 
View Full specifications

Versatile and excellent price-quality balance ironworker. Two simultaneous work stations. Five work stations:

  • punching (550 kN power)
  • notching
  • shear of iron section L (1100 kN power)
  • shear of flatbar
  • Cut of round and square bars 

4 VERSIONS ON EACH MODE:   A, S, AD, SD

"A" VERSION

  • Machines driven by two cylinders.
  • 5 work stations, fitted with tools for L , shearing, round and square bars, rectangular notching and punching
  • Quick change punch
  • Flat bar shearing table with adjustable guides
  • 2 simultaneous work stations
    • Ready for production pack comprising:
    • Precision punching table with X & Y measuring stops.
    • Precision notching table with X & Y measuring stops
    • One metre "touch & cut" length stop with fine adjusting.
    • Lamp for enhanced vision of cutting zones.
    • 10 sets of round punches and dies.

"S" VERSION
Version A, including the following standard fitted accessories:

  • Greater speed backed by a powerful hydraulic unit.
  • Special equipment for approaching at reduced pressure and slow speed.

"AD" VERSION

  • The same features as the A version, but with a deeper throat for larger plate and sheet metal applications.

"SD" VERSIOND

  • The same features as the S version, but with a deeper throat for larger plate and sheet metal applications.
<< see in inches
FEATURES     55/110
A, S, AD, SD		 80/150
A, S, AD, SD		 110/180
A, S, AD, SD		 165/300
S, SD		 220/300
S, SD
*The first figure indicates metric tons on the punching end.
*The second figure, metric tons on L-shearing end.		              
SHEARS FOR PROFILES              
Flatbar with slight deformation   mm 300x15 450x15 600x15 750x20 750x20
    mm 200x20 300x20 400x20 400x30 400x30
Length of blade   mm 305 475 605 765 765
Square bar   mm 25 - - - -
Work height   mm 880 850 960 870 870
               
CSHEARS FOR PROFILES              
Shearing powe   kN 1100 1500 1800 3000 3000
L at 90 º shear without deformation   mm 120x120x10 130x130 x13 152x152x13 205x205x18 205 x205x18
L at 45 º   mm 70x70x7 70x70x7 70x70x7 70x70 x 7 70x70x7
WITH SPECIAL BLADE              
L at 90 º
(shear with slight deformation)		   mm 130x130x13 152x152x13 160x160x16 205x205x25 205x205x25
               
SHEARS FOR SOID BARS              
Round bar ø   mm 40 45 50 60 60
Square bar     mm 40 45 50 60 60
WITH SPECIAL BLADES              
UPN Profiles   mm 120 140 160 180 180
IPN Profiles   mm 120 140 160 180 180
               
NOTCHING              
Plate thickness   mm 10 12 13 16 16
L of   mm 100 100 100 120 120
Depth   mm 90 90 90 110 110
Width   mm 42 52 52 58 58
               
PUNCHING              
Punching Power   kN 550 800 1100 1650 2200
Maximum capacity with quick change   mm ø 40x10 ø 40x14 ø 40x20 ø 40x30  
and die with gooseneck die holder   mm ø 20x20 ø 24x24 ø 28x28 ø 34x34 ø 40x40
Throat depth A and S models   mm 250 300 300 510 385
Throat depth A and SD models   mm 500 500 610 610 475
Stroke   mm 60 70 80 100 100
Work height   mm 1085 1095 1165 1110 1110
               
GENERAL SPECIFICATIONS              
Punch stroke per minute
(based on 20 mm travel)		              
  A y AD   25 25 17 - -
  S y SD   37 40 28 31 26
Motor: A y AD kW 3 5 5 - -
  S y SD kW 5 9 9 15 15
Approx. net weight with production pack              
  A kg 1320 1900 2500 - -
  S kg 1390 2070 2750 5200 5900
  AD Kg 1680 2230 3050 - -
  SD kg 1750 2400 3300 6300 7000
Gross weight A kg 1518 2185 2875 - -
  S kg 1598 2323 3162 5980 6785
  AD kg 1932 2622 3508 - -
  SD kg 2012 2760 3795 7245 8050
Packaging dimensions A y S m 1,67x1,16x2,09 2,13x1,20x2,05 2,13x1,20x2,20 2,83x1,60x2,20 2,88x1,60x2,40
  AD y SD m 2,10x1,16x2,09 2,31x1,2x2,05 2,69x1,4x2,20 2,95x1,60x2,20 3,04x1,60x2,40
Volume of maritime packing A y S m3 4,04 4,72 5,62 10 11,06
  AD y SD m3 5,09 6,68 8,28 10,38 11,67
<< see in mm
FEATURES     55/110
A, S, AD, SD		 80/150
A, S, AD, SD		 110/180
A, S, AD, SD		 165/300
S, SD		 220/300
S, SD
*The first figure indicates metric tons on the punching end.
*The second figure, metric tons on L-shearing end.		              
SHEARS FOR PROFILES              
Flatbar with slight deformation   in 12” x 5/8” 18” x 5/8” 24” x 5/8”
16” x 3/4”		 30” x 3/4”
20” x 1”		 30” x 3/4”
20” x 1”
    in 8” x 3/4” 12” x 3/4” 12” x 1” 16” x 11/8” 16” x 11/8”
Length of blade   in 12” 18-11/16” 24” 301/8” 301/8”
Square bar   in 1” - - - -
Work height   in 345/8” 331/2” 37-13/16” 331/4” 331/4”
               
CSHEARS FOR PROFILES              
Shearing powe   ton 110 150 180 300 300
L at 90 º shear without deformation   in 4”x4”x 1/2” 5”x 5” x 1/2” 6”x 6” x 1/2” 8”x 8” x 3/4” 8”x 8” x 3/4”
L at 45 º   in 3”x3”x5/16 3”x3”x5/16 3”x3”x5/16 3”x3”x5/16 3”x3”x5/16
WITH SPECIAL BLADE              
L at 90 º
(shear with slight deformation)		   in 5”x5”x1/2” 6”x6”x1/2” 6”x6”x 5/8” 8”x8”x1” 8”x8”x1”
               
SHEARS FOR SOLID BARS              
Round bar ø   in 1-9/16” 13/4” 2” 23/8” 23/8”
Square bar     in 1-9/16” 13/4” 2” 23/8” 23/8”
WITH SPECIAL BLADES              
UPN Profiles   in 5” 5” 6” 7” 7”
IPN Profiles   in 4” 5” 6” 7” 7”
               
NOTCHING              
Plate thickness   in 3/8” 15/32” 1/2” 5/8” 5/8”
L of   in 4” 4” 4” 5” 5”
Depth   in 31/2” 31/2” 31/2” 4-5/16” 4-5/16”
Width   in 15/8” 2” 2” 21/4” 21/4”
               
PUNCHING              
Punching Power   ton 60 88 120 185 240
Maximum capacity with quick change   in ø 11/2”x 3/8” ø 11/2”x 9/16” ø 11/2”x 3/4” ø 11/2”x11/4”  
and die with gooseneck die holder   in ø 3/4”x 3/4” ø 7/8” x 7/8” ø 1-3/32”x1-3/32” ø 1-15/16”x1-5/16” ø 11/2”x11/2”385
Throat depth A and S models   in 10” 12” 12” 20” 15”
Throat depth A and SD models   in 20” 20” 24” 24” 181/2”
Stroke   in 23/8” 23/4” 3-5/32” 3-15/16” 3-15/16”
Work height   in 42” 43” 453/8” 433/4” 43”
               
GENERAL SPECIFICATIONS              
Punch stroke per minute
(based on 20 mm travel)		              
  A y AD   25 25 17 - -
  S y SD   37 40 28 31 26
Motor: A y AD H.P. 7,5 8.5 8.5 - -
  S y SD H.P. 8.5 12.5 12.5 20 20
Approx. net weight with production pack              
  A lbs 2,910 4,190 5,510 - -
  S lbs 3,065 4,565 6,060 11,465 13,010
  AD lbs 3,705 4,920 6,725 - -
  SD lbs 3,860 5,300 7,275 13,890 15,435
Gross weight A lbs 3,350 4,820 6,340 - -
  S lbs 3,525 5,125 6,975 13,185 14,960
  AD lbs 4,260 5,780 7,735 - -
  SD lbs 4,435 6,085 8,370 15,975 17,750
Packaging dimensions A y S in 673/4”x455/8”x821/4” 833/4”x471/4”x 803/4” 833/4”x471/4”x865/8” 1111/2”x63”x865/8” 1133/8”x63”x941/2”
  AD y SD in 825/8”x455/8”x821/4” 91”x471/4”x 803/4” 106”x55”x865/8” 116”x63”x865/8" 1195/8”x63”x941/2”
Volume of maritime packing A y S ft3 1421/2 1665/8 1981/2 3531/8 3905/8
  AD y SD ft3 1793/4 2357/8 2921/2 3661/2 4121/8

Capacities based on a material resistance of 45 kg/mm 2.
- The manufacturer reserves the right to make modifications without prior notice

 

Punching station dimensions

<< see in inches
    A B C D E F G H I K L M N O P Q R S
HYDRACROP 55 S 254 350 280 65 57 33 120,5 81 233,5 137 25 208 35 233 72 268 125 1066
  SD 508 350 280 65 57 33 120,5 81 233,5 137 25 208 35 233 99 110 170 1066
HYDRACROP 80 S 305 370 300 65 64 31 123 89 253,5 144 25 234 45 304 120 250 120 1094
  SD 510 370 300 65 64 31 123 89 253,5 144 25 234 45 304 130 70 225 1094
HYDRACROP 110 S 305 395 325 79 81 40 140,5 96 267 161 25 256 45 311 120 275 120 1151
  SD 610 395 325 79 81 40 140,5 96 267 161 25 256 45 311 150 72 260 1151
HYDRACROP 165 S 510 450 380 85 79 47 158 104 322 200 25 369 45 450 160 80 160 1110
  SD 610 450 380 85 79 47 158 104 322 200 25 369 45 450 150 100 260 1110
HYDRACROP 220 S 385 470 400 85 79 47 158 104 322 200 25 372 45 450 35 350 35 1090
  SD 475 470 400 85 79 47 158 104 322 200 25 372 45 450 85 300 85 1090
Dimensions in mm.
<< see in mm
    A B C D E F G H I K L M N O P Q R S
HYDRACROP 55 S 10.00 13.78 11.02 2.56 2.24 1.30 4.74 3.19 9.19 5.39 0.98 8.19 1.38 9.17 2.83 10.55 4.96 41.94
  SD 20.00 13.78 11.02 2.56 2.24 1.30 4.74 3.19 9.19 5.39 0.98 8.19 1.38 9.17 3.90 4.33 6.73 41.97
HYDRACROP 80 S 12.01 14.57 11.81 2.56 2.52 1.22 4.84 3.50 9.98 5.67 0.98 9.21 1.77 11.97 4.72 9.84 4.72 43.07
  SD 20.08 14.57 11.81 2.56 2.52 1.22 4.84 3.50 9.98 5.67 0.98 9.21 1.77 11.97 5.12 2.76 8.86 43.07
HYDRACROP 110 S 12.01 15.55 12.80 3.11 3.19 1.57 5.53 3.78 10.51 6.34 0.98 10.08 1.77 12.24 4.72 10.83 4.72 45.31
  SD 24.02 15.55 12.80 3.11 3.19 1.57 5.53 3.78 10.51 6.34 0.98 10.08 1.77 12.24 5.91 2.83 10.24 45.31
HYDRACROP 165 S 20.08 17.72 14.96 3.35 3.35 1.85 6.22 4.09 12.68 7.78 0.98 14.53 1.77 17.72 6.30 3.15 6.30 43.70
  SD 24.02 17.72 14.96 3.35 3.35 1.85 6.22 4.09 12.68 7.78 0.98 14.53 1.77 17.72 5.91 3.15 10.24 43.70
HYDRACROP 220 S 15.16 18.50 15.75 3.35 3.35 1.85 6.22 4.09 12.68 7.78 0.98 14.65 1.77 17.72 1.38 13.78 1.38 42.91
  SD 18.70 18.50 15.75 3.35 3.35 1.85 6.22 4.09 12.68 7.78 0.98 14.65 1.77 17.72 3.35 11.81 3.35 42.91
Dimensions in inches.

 

Brochure

Milimeters Inches
 
 

Video

Get more...

Tools

  • Semipaxy
    La Semipaxy es una solución para el punzonado y posicionamiento por topes mediante control CNC. Se trata de una mesa de control de ejes X e Y con topes programables.

  • PAX
    PAX, es una unidad de posicionamiento en el eje X desarrollada por GEKA para el punzonado de agujeros en línea.

  • ALRS
    El conjunto ALRS ha sido diseñado para la alimentación automática de llantas sobre la estación de cizallado de nuestros modelos HYDRACROP.


Print  Print Send by Email  Send by Email

Copyright © 2011 Maquinaria GEKA S.A. All rights reserved.
Maquinaria GEKA S.A. - Poligono Zerradi 1 - 20180 Oiartzun (SPAIN) - TEL: +34 943 490 034

Contact | Disclaimer | RSS | Sitemap
Share: Share on Facebook Share on Twitter Share on Google +1 Save into my Del.icio.us favorites Save to My Google Bookmarks Save to My Yahoo! favorites Send to Menéame Share on your website
Learn:
Suscribe to newsletter: