YOU ARE AT: One cylinder

One cylinder

The GEKA one-cylinder Punching-Shearing machines are designed to transform different types of profiles and steel wheels. They are not only compact and economic machines but also very versatile and productive. This range has 4 models that go from 36T to 50T. They have the classic workstations, (punching, notching, shearing, angle and wheel shearing). The BENDICROP 50 is worth highlighting. This model has the previously mentioned workstations plus a bending workstation, according to the EC regulations. It also has an exclusive system for shearing wheels with any deformation.

Banner 1 banner home 2 banner home 3
Geka Ironworkerswww.geka-ironworkers.com

One cylinder

<< see in inches Microcrop Minicrop Multicrop
FEATURES MICROCROP 36 MINICROP 45 MULTICROP 45
Punching power 360 kN 450 kN 450 kN
ø Through thickness ø 27x10 mm ø 27x12 mm ø 27x12 mm
Shears for flat bar 350x6 mm
200x13 mm
300x10 mm
200x13 mm
300x10 mm
200x13 mm
Shears for section iron L at 90º 80x80x8 mm 80x80x8 mm 80x80x8 mm
Shears for section iron L at 45º 50x50x6 mm - 60x60x6 mm
Notching - 60x50x7 mm 60x50x7 mm
Bending attachment - - -
<< see in mm Microcrop Minicrop Multicrop
FEATURES MICROCROP 36 MINICROP 45 MULTICROP 45
Punching power 40 tons 50 tons 50 tons
ø Through thickness Ø 1-1/16" x 3/8" Ø 1-1/16" x 1/2" Ø 1-1/16" x 3/8"
Shears for flat bar 13¾” x ¼”
8” x ½”
10” x 3/8”
8” x ½”
10” x 3/8”
8” x ½”
Shears for section iron L at 90º 3” x 3” x 5/16" 3” x 3” x 5/16" 3” x 3” x 5/16"
Shears for section iron L at 45º - - 2¼” x 2¼” x ¼”
Notching - 2”x1½”x¼” 2”x1½”x¼”
Bending attachment - - -

 

*Optional
Capacities based on a material resistance of 45 kg/mm2  or 65,000 tensile

FULL SPECIFICATIONS

This range includes four electrically driven models with the following standard equipment: work table, limit switches and measuring scales. The shearing system consists of one single cut, without wasting any material. The MINICROP and MULTICROP have been fitted with a patented floating blade for cutting section iron without any deformation of the material.

CONFIGURATION
  MICROCROP MINICROP MULTICROP
L  90º
L  45º 2 legs 1 legs 2 legs
Flat bar
Punching
Notching Optional for punching station
Bending Optional for punching station Optional for punching station Optional for punching station
Electric Stop Pre Installation Pre Installation Pre Installation

 

<< see in inches
FEATURES   MICROCROP MINICROP MULTICROP
SHEAR FOR FLAT BARS        
Flat bars (low deformation) mm 350 x 6 300 x 10 300 x 10
  mm 200 x 13 200 x 13 200 x 13
Length of blades
mm 356 305 305
Round bars  ø mm 30 - -
Square bars mm 25 - -
Shear or one angle leg L at 45 º mm 70 80 80
Working height
mm 980 1030 1030
SHEARS FOR SECTION IRON        
L at 90 º mm 80 x 80 x 8 80 x 80 x 8 80 x 80 x 8
L at 90 º (with slight deformation) mm - 100 x 100 x 10 -
L at 45 º mm 50 x 50 x 6 - 60 x 60 x 6
Round Bar ø mm 35 (optional) 30 25
Square bar mm 30 (optional) 30 22
NOTCHING   (OPTIONAL)    
Plate Thickness mm 8 7 7
Angle of
mm 60 60 60
Depth mm 53 50 50
Width mm 36 40 40
PUNCHING        
Punching Power kN 360 450 450
Maximum Capacity mm ø 27 x 10 ø 27 x 13 ø 27 x 13
Throat mm 170 175 160
Stroke mm 28 21 21
Working Height mm 980 1015 1015
BENDING ATTACHMENT   (OPTIONAL) (OPTIONAL) (OPTIONAL)
Bending Power kN 360 450 450
Maximum width mm 80 80 80
Maximum Capacity mm 80 x 12 80 x 14 80 x 14
GENERAL SPECIFICATIONS        
Motor kW 2,2 2,2 2,2
nº strokes per minute (stroke= 15mm) - 24 16 16
Net weight kg 485 800 900
Gross weight
kg 575 1000 1100
Packaging dimensions m 1,1 x 0,76 x 1,5 1,36 x 1,1 x 1,5 1,36 x 1,1 x 1,7
Volume of seaworthy package m3 1,26 2,25 2,55
OPTIONAL EQUIMENTS        
SHEARS FOR SECTION IRONS        
U and U section iron mm 50 100 100
PIPE NOTCHING        
Maximum diameter mm 50 60 60
PUNCHING LARGER DIAMETERS        
Maximum diameter mm ø 36 x 8 ø 100 x 4 ø 100 x 4

 

<< see in mm
FEATURES   MICROCROP MINICROP MULTICROP
SHEAR FOR FLAT BARS        
Flat bars (low deformation) In 13 3/4” x 1/4” 10” x 3/8” 10” x 3/8”
  In 8” x 1/2” 8” x 1/2” 8” x 1/2”
Length of blades
In 14” 12” 12”
Round bars  ø In 1-3/16” - -
Square bars In 1” - -
Shear or one angle leg L at 45 º In 2 1/2” 3” 3”
Working height
In 38 1/2” 40 1/2” 40 1/2”
SHEARS FOR SECTION IRON        
L at 90 º In 3” x 3” x 5/16" 3” x 3” x 5/16" 3” x 3” x 5/16"
L at 90 º (with slight deformation) In - 4” x 4” x 3/8” -
L at 45 º In 2” x 2” x 1/4”” - 2 1/4” x 2 1/4” x 1/4”
Round Bar ø In 1 3/8” (optional) 1 1/4” 1”
Square bar In 1 1/4” (optional) 1 1/4” 7/8”
NOTCHING   (OPTIONAL)    
Plate Thickness In 5/16” 1/4” 1/4”
Angle of
In 2 1/2” 2 1/2” 2 1/2”
Depth In 2” 2” 2”
Width In 1 3/8” 1 1/2” 1 1/2”
PUNCHING        
Punching Power Ton 40 50 50
Maximum Capacity In ø 1-1/16” x 3/8” ø 1-1/16”x1/2” ø 1-1/16”x1/2”
Throat In 6 5/8” 6 7/8” 6 1/4”
Stroke In 1-3/32” 3” 3”
Working Height In 38 1/2” 40” 40”
BENDING ATTACHMENT   (OPTIONAL) (OPTIONAL) (OPTIONAL)
Bending Power Ton 36 45 45
Maximum width In 3” 3” 3”
Maximum Capacity In 3” x 1/2” 3” x 9/16” 3” x 9/16”
GENERAL SPECIFICATIONS        
Motor H.P. 3 4 4
nº strokes per minute (stroke= 3/4”) - 24 16 16
Net weight Lbs 1067 1760 1985
Gross weight
Lbs 1265 2690 2425
Packaging dimensions In 43” x 30” x 59” 54” x 43” x 59” 54” x 44” x 67”
Volume of seaworthy package Ft3 45 80 90
OPTIONAL EQUIMENTS        
SHEARS FOR SECTION IRONS        
U and U section iron In 2” 4” 4”
PIPE NOTCHING        
Maximum diameter In 2” 21/4” 21/4”
PUNCHING LARGER DIAMETERS        
Maximum diameter In ø 1-13/32”x5/16” ø 14” x 5/32” ø 4” x 5/32”

- Capacities based on a material resistance of 45 kg/mm2 or 65,000 tensile.
- The manufacturer reserves the right to make modifications without prior notice
 


Send by Email

We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
You can change the settings or get more information here.

Copyright 2011 Maquinaria GEKA S.A. All rights reserved.
Maquinaria GEKA S.A. - Poligono Zerradi 1 - 20180 Oiartzun (SPAIN) - TEL: +34 943 490 034