codMenu[2700]
One cylinder
YOU ARE AT: English/One cylinder
Geka Ironworkerswww.geka-ironworkers.com
1
7001
Share

One cylinder Hydraulic Ironworkers

<< see in inches
FEATURES MICROCROP 36
Punching power 360 kN
ø Through thickness ø 27x10 mm
Shears for flat bar 350x6 mm
200x13 mm
Shears for section iron L at 90º 80x80x8 mm
Shears for section iron L at 45º 50x50x6 mm
Notching -
Bending attachment -
FEATURES MINICROP 45
Punching power 450 kN
ø Through thickness ø 27x12 mm
Shears for flat bar 300x10 mm
200x13 mm
Shears for section iron L at 90º 80x80x8 mm
Shears for section iron L at 45º -
Notching 60x50x7 mm
Bending attachment -
FEATURES MULTICROP 45
Punching power 450 kN
ø Through thickness ø 27x12 mm
Shears for flat bar 300x10 mm
200x13 mm
Shears for section iron L at 90º 80x80x8 mm
Shears for section iron L at 45º 60x60x6 mm
Notching 60x50x7 mm
Bending attachment -
<< see in mm
FEATURES MICROCROP 36
Punching power 40 tons
ø Through thickness Ø 1-1/16" x 3/8"
Shears for flat bar 13¾" x ¼"
8" x ½"
Shears for section iron L at 90º 3" x 3" x 5/16"
Shears for section iron L at 45º -
Notching -
Bending attachment -
FEATURES MINICROP 45
Punching power 50 tons
ø Through thickness Ø 1-1/16" x 1/2"
Shears for flat bar 10" x 3/8"
8" x ½"
Shears for section iron L at 90º 3" x 3" x 5/16"
Shears for section iron L at 45º -
Notching 2"x1½"x¼"
Bending attachment -
FEATURES MULTICROP 45
Punching power 50 tons
ø Through thickness Ø 1-1/16" x 3/8"
Shears for flat bar 10" x 3/8"
8" x ½"
Shears for section iron L at 90º 3" x 3" x 5/16"
Shears for section iron L at 45º 2¼" x 2¼" x ¼"
Notching 2"x1½"x¼"
Bending attachment -

 

*Optional
Capacities based on a material resistance of 65,000 tensile

FULL SPECIFICATIONS

Esta gama comprende cuatro modelos accionados por mando eléctrico y equipados de serie con mesa de trabajo, topes y escalas de medición. Opcionalmente, se pueden montar topes eléctricos (excepto en la BENDICROP, que lo incluye de serie) para corte de llantas y perfiles. El sistema de cizallado es de corte simple, sin pérdida de material. Los modelos MINICROP y MULTICROP están equipados con cuchilla flotante patentada para cortes de perfiles sin deformación.

CONFIGURACIÓN MICROCROP MINICROP MULTICROP
L  90º
L  45º 2 alas  1 ala  2 alas
Llanta
Punzonado
Entallado Opcional en punzonado
Plegado Opcional en punzonado Opcional en punzonado Opcional en punzonado
Tope eléctrico Preinstalación Preinstalación Preinstalación

 

CARACTERÍSTICAS   MICROCROP MINICROP MULTICROP
CIZALLA PARA LLANTAS        
Llanta (poco deformada) mm 350 x 6 300 x 10 300 x 10
  mm 200 x 13 200 x 13 200 x 13
Largo de cuchillas mm 356 305 305
Barra redonda  ø mm 30 - -
Barra cuadrada mm 25 - -
Corte de un ala de L a 45 º mm 70 80 80
Altura de trabajo mm 980 1030 1030
CIZALLA PARA PERFILES        
L a 90 º mm 80 x 80 x 8 80 x 80 x 8 80 x 80 x 8
L a 90 º (con pequeña deformación) mm - 100 x 100 x 10 -
L a 45 º mm 50 x 50 x 6 - 60 x 60 x 6
Barra redonda ø mm 35 (opcional) 30 25
Barra cuadrada mm 30 (opcional) 30 22
ENTALLADO   (OPCIONAL)    
Espesor chapa mm 8 7 7
Angulo de  mm 60 60 60
Profundidad mm 53 50 50
Ancho mm 36 40 40
PUNZONADO        
Fuerza de punzonado kN 360 450 450
Capacidad máxima mm ø 27 x 10 ø 27 x 13 ø 27 x 13
         
Escote mm 170 175 160
Recorrido mm 28 21 21
Altura de trabajo mm 980 1015 1015
PLEGADORA   (OPCIONAL) (OPCIONAL) (OPCIONAL)
Fuerza de plegado kN 360 450 450
Largura máxima mm 80 80 80
Capacidad máxima mm 80 x 12 80 x 14 80 x 14
ESPECIFICACIONES GENERALES        
Motor kW 2,2 2,2 2,2
Golpes minuto (carrera= 15mm) - 24 16 16
Peso neto kg 485 800 900
Peso bruto kg 575 1000 1100
Dimensiones del embalaje m 1,1 x 0,76 x 1,5 1,36 x 1,1 x 1,5 1,36 x 1,1 x 1,7
Volumen del embalaje marítimo m3 1,26 2,25 2,55
EQUIPOS OPCIONALES        
CIZALLAS PARA PERFILES        
Perfiles D e I mm 50 100 100
ENTALLADO DE TUBO        
Diámetro máximo mm 50 60 60
PUNZONADO DIAMETROS MAYORES        
Diámetro máximo mm ø 36 x 8 ø 100 x 4 ø 100 x 4

- Capacidades basadas en resistencia material 45 kg/mm2.
- El fabricante se reserva el derecho de cambiar características sin previa notificación.

GEKA one cylinder Punching Shears are designed to transform different sections and steel flat bars.

Compact and economic machines which are also very versatile and productive. This line is made up of 4 models that run from 36T to 50T. They are equipped with the classic work stations (punching, notching, cutting Ø, cutting angles and flat bars). This model is equipped with the aforementioned work stations, and an additional bending station, which is compliant with CE standards.

  • Microcrop

    Ironworker - one cylinder punching machine with 3 work stations: punching, shear for flat bars, angle cutting

    info
  • Minicrop

    One cylinder universal ironworker with four work stations: Punching Notching Shear for flat bars shear L profiles Cutting of round and square bars

    info
  • Multicrop

    The MULTICROP model offers, all features of the MINICROP model, as well as shearing angle section iron at 45║ leg in and leg out.

    info
Copyright ę 2015 Maquinaria GEKA S.A. All rights reserved.
Website developed by DMacroWeb using the tool DM Corporative
Social networks
Technical characteristics valid except for typographical errors or omissions.
Geka group, committed to continuous product improvement, may without notice change technical specifications, equipment and photographs of models, as well as any other information contained herein.
Share: Share on Facebook Share on Twitter Share on Google +1 Save into my Del.icio.us favorites Save to My Google Bookmarks Save to My Yahoo! favorites Send to MenÚame Share on your website
Learn:
Suscribe to newsletter: