Single Cylinder Ironworkers for 1 worker and up to 4 work stations: Punching, Notching, Flat Bars Shearing and Angle Cutting.
Single Cylinder Ironworkers models.
Microcrop Hydraulic Ironworker.
One Cylinder Ironworker machine with 3 work stations: Punching, Shear for Flat Bars, Angle Cutting.
Minicrop Hydraulic Ironworker.
One Cylinder Ironworker with 4 work stations: Punching, Notching, Shearing Flat Bars, Angles and Round and Square Bars.
Multicrop Hydraulic Ironworker.
One Cylinder Ironworker, similar to Minicrop, but with an Angle Shearing Station at 45º leg in and leg out.
| FEATURES | MICROCROP 36 | MINICROP 45 | MULTICROP 45 |
|---|---|---|---|
| Punching power | 36 Ton | 45 Ton | 45 Ton |
| Maximum capacity | Ø 28×10 mm | Ø 28×12 mm | Ø 28×12 mm |
| Flat Bars Shearing | 350×6 mm 200×13 mm |
300×10 mm 200×13 mm |
300×10 mm 200×13 mm |
| Angle cut 90º | 80x80x8 mm | 80x80x8 mm | 80x80x8 mm |
| Angle cut 45º | 50x50x6 mm | – | 60x60x6 mm |
| Notching | – | 60x50x7 mm | 60x50x7 mm |
- Capacities based on a material resistance of 45 Kg/mm2.
- GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
- Technical characteristics valid except for typographical errors or omissions.