Multicrop, Single Cylinder Hydraulic Ironworker with 4 workstations.
One Cylinder Ironworker with 4 work stations: Punching, Notching, Shearing Flat Bars, Angle Shearing Station at 45º leg in and leg out and Round and Square Bars.

One Cylinder Ironworker with 4 workstations:
- Goose neck die-holder for Punching U and I Profiles in leg and web.
- Angle Shearing at 45º leg in and leg out in a single operation.
- Round and Squared Bars Cutting.
- Flat Bars Shearing with minimum deformation.
- Rectangular Nothing with worktable.
- Shearing U and I Profiles up to 100 mm with optional blades.
Wide range of optional equipment for Notching and Punching stations.
FEATURES | MULTICROP |
---|---|
Punching Power | 45 Tons |
Maximum capacity | Ø 28×10 mm |
Shearing of Flat Bars | 300 x 10 mm 200 x 13 mm |
Angle Shearing at 90º | 80 x 80 x 8 mm |
Angle Shearing at 45º | 80 x 80 x 8 mm |
Notching | 60 x 50 x 7 mm |
- Capacities based on a material resistance of 45 Kg/mm2.
- GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
- Technical characteristics valid except for typographical errors or omissions.
Multicrop features.

Bars and Angles Shearing.

Angle Shearing at 45º leg in and leg out in a single operation.

Progressive Cutting of Flat Bars with minimum deformation.

Goose neck die-holder for Punching U and I Profiles in leg and web

Rectangular Nothing with worktable.