codMenu[12541]
Geka Ironworkerswww.geka-ironworkers.com
Share

Features

  • Technically dimensioned bed.
  • Cylinder with additional guide.
  • Strong and accurate shaft system to avoid distortions.
  • Gradual centering of punch.
  • Quick punch change.
  • Safety protection.
  • Ample space for mounting special equipment.
  • Optimum operation speed.
  • Large number of optional, standard and special accessories to perform a wide range of jobs.
  • Range of punching machines from 55 Tn to 220 Tn with punching throats

 

info
Angles UPN profile Flat bars H profile
Centering Punching

<< see in inches
FEATURES PUMA 55
Punching Power 550 kN
° through thickness ° 40x10 mm
Throat depth 500 mm
750 mm
Maximum stroke 60 mm
Strokes per minute 37
FEATURES PUMA 80
Punching Power 800 kN
° through thickness ° 40x14 mm
Throat depth 510 mm
750 mm
Maximum stroke 70 mm
Strokes per minute 40
FEATURES PUMA 110
Punching Power 1100 kN
° through thickness ° 40x20 mm
Throat depth 500 mm
750 mm
Maximum stroke 80 mm.
Strokes per minute 28
FEATURES PUMA 165
Punching Power 1650 kN
° through thickness ° 40x30 mm
Throat depth 510 mm
760 mm
Maximum stroke 100 mm
Strokes per minute 28
FEATURES PUMA 220
Punching Power 2200 kN
° through thickness ě 40x40 mm
Throat depth 510 mm
800 mm
Maximum stroke 100 mm
Strokes per minute 25
<< see in mm
FEATURES PUMA 55
Punching Power 60 tons
° through thickness ě 1-1/2" x 3/8"
Throat depth 19" x 5/8"
29 1/2"
Maximum stroke 2 3/8"
Strokes per minute 37
FEATURES PUMA 80
Punching Power 88 tons
° through thickness ě 1-1/2" x 9/16"
Throat depth 20"
29 1/2"
Maximum stroke 2 3/4"
Strokes per minute 40
FEATURES PUMA 110
Punching Power 120 tons
° through thickness ě 1-1/2" x 3/4"
Throat depth 19" x 5/8"
29 1/2"
Maximum stroke 3-5/32"
Strokes per minute 28
FEATURES PUMA 165
Punching Power 185 tons
° through thickness ě 1 1/2" x 1 1/4"
Throat depth 20"
29 7/8"
Maximum stroke 3-15/16"
Strokes per minute 28
FEATURES PUMA 220
Punching Power 220 tons
° through thickness ě 1 1/2" x 1 1/2"
Throat depth 20"
31 1/2"
Maximum stroke 3-15/16"
Strokes per minute 25

Capacities based on a material resistance of 65,000 tensile

FULL SPECIFICATIONS

<< see in inches
HIDRAULIC PUNCHING MACHINES     PUMA-55 PUMA-80 PUMA-110 PUMA-165 PUMA-220
PUNCHING              
Punching power   kN 550 800 1100 1650 2200
Maximum capacity   mm ° 40x10 ° 40x14 ° 40x20 ° 40x30 ° 40x40
Throat S mm 500 510 500 510 510
  SD mm 750 750 750 760 800
PUNCHING OF SECTIONS WITH GOOSENECK DIE HOLDER              
I on the leg   mm 100-300 100-300 100-450 100-450 100-450
I on the web   mm 100-500 100-500 100-500 120-500 120-500
U on the leg   mm 100-300 100-300 120-400 120-400 120-400
U on the web   mm 120-260 120-380 120-400 120-400 120-400
GENERAL FEATURES              
Motor power   kW 5 9 9 15 20
Strokes per minute
(based on 20 mm stroke)
    37 40 28 28 1-1/4"
Maximum stroke   mm 60 70 80 100 100
Woeking height S/SD mm 1060/810 1094/1194 991/1066 1060/1060 1013/1013
Net weight S/SD Kg 1150/1885 1715/2115 3150/3970 4290/4525 5200/5500
Gross weight S/SD Kg 1320/2100 1925/2350 3400/4300 4700/5000 5700/6000
Volume S/SD m3 3,63/4,17 4,53/5,87 5,55/6,82 7,31/8,95 9,63/10
Dimensions with seaworthy packaging   S 1,55x1,2x1,95 1,7x1,3x2,05 2,08x1,3x2,05 2,03x1,6x2,25 2,56x1,6x2,35
    SD 1,93x1,2x1,8 2,1x1,3x2,15 2,28x1,3x2,3 2,03x1,6x2,35 2,66x1,6x2,35
OPTIONAL EQUIPMENT              
Tube notching   mm 60 60 60 60 60
Oversize diameters punching equipment   ° mm 100x4 100x6 100x8 100x 12 100x16
<< see in mm
HIDRAULIC PUNCHING MACHINES     PUMA-55 PUMA-80 PUMA-110 PUMA-165 PUMA-220
PUNCHING              
Punching power   Tons 60 88 120 185 220
Maximum capacity   ° 1 1/2┐ x 3/8" 1 1/2┐ x 9/16" 1 1/2┐ x 3/4" 1 1/2┐ x 1 1/4" 1 1/2┐ x 1 1/2"
Throat S in 19 5/8" 20" 19 5/8" 20" 20"
  SD in 29 1/2" 29 1/2" 29 1/2" 29 7/8" 31 1/2"
PUNCHING OF SECTIONS WITH GOOSENECK DIE HOLDER              
I on the leg   in 4"- 12" 4"- 12" 4"-17 3/4" 4"-17 3/4" 4"-17 3/4"
I on the web   in 4"-19 5/8" 4"-19 5/8" 4"-19 5/8" 4"-19 5/8" 4"-19 5/8"
U on the leg   in 4"- 12" 4"- 12" 4 3/4" -15 3/4" 4 3/4" -15 3/4" 4 3/4" -15 3/4"
U on the web   in 4 3/4" -10 1/4" 4 3/4" -14 7/8" 4 3/4" -15 3/4" 4 3/4" -15 3/4" 4 3/4" -15 3/4"
GENERAL FEATURES              
Motor power   H.P. 8.5 12 20 27 27
Strokes per minute
(based on 3/4" stroke)
    37 40 28 28 1-1/4"
Maximum stroke   in 2 3/8┐ 2 3/84┐ 3-5/32┐ 3-15/16┐ 3-15/16┐
Woeking height S/SD in 41 3/4" / 31 7/8" 43"/ 47" 39"/ 42" 41 3/4" / 41 3/4" 39 7/8" / 39 7/8"
Net weight S/SD Lbs 2,535 / 4,155 2,415 / 4,665 6,945 / 8,755 9,460 / 9,975 11,465 / 12,125
Gross weight S/SD Lbs 2,910 / 4,630 4,245 / 5,180 7,495 / 9,480 10,365 / 11,025 12,570 / 13,230
Volume S/SD Ft3 128 1/8 / 147 1/4 160 / 207 1/4 196 / 240 7/8 258 1/8 / 316 340 / 353 1/8
Dimensions with seaworthy packaging S in 61"x47"x77" 67"x51"x81" 82"x51"x81" 80"x63"x128" 100"x63"x93"
  SD in 73"x47"x71" 83"x51"x85" 90"x51"x91" 80"x63"x128" 105"x63"x93"
OPTIONAL EQUIPMENT              
Tube notching   in 2 3/8" 2 3/8" 2 3/8" 2 3/8" 2 3/8"
Oversize diameters punching equipment   ° 4"x5/32" 4"x1/4" 4"x3/8" 4"x1/2" 4"x5/8"
<< see in inches
    A B C D E F G H I J K L M N 0 P Q R S
PUMA 55 S 500 340 270 65 55 33 120,5 81 233,5 81 137 25 231 45 327 102 78 185 1060
  SD 750 340 270 65 55 33 120,5 81 233,5 81 137 25 231 45 327 102 78 185 810
PUMA 80 S 510 370 300 65 62 31 123 89 253,5 89 144 25 234 45 304 130 70 234 1094
  SD 750 370 300 65 62 31 123 89 253,5 89 144 25 234 45 304 130 70 278 1194
PUMA 110 S 500 420 350 79 79 40 140,5 96 267 96 161 25 326 47 461 95 125 100 991
  SD 750 420 350 79 79 40 140,5 96 267 96 161 25 326 47 461 95 125 100 1066
PUMA 165 S 510 450 350 85 79 35 158 104 430 160 200 25 372 45 450 - 240 - 1060
  SD 760 450 380 85 79 35 158 104 430 160 200 25 372 45 450 141 98 245 1060
PUMA 220 S 510 450 375 85 79 33 162 100 435 151 198 30 - 30 483 - 330 - 1013
  SD 800 450 375 85 79 33 162 100 435 151 198 30 - 30 483 125 200 216 1013
Sizes in mm
<< see in mm
    A B C D E F G H I J K L M N 0 P Q R S
PUMA 55 S 19 11/16 13 3/8 10 5/8 2 9/16 2 3/16 1 5/16 4 3/4 3 3/16 9 3/16 3 3/16 5 3/8 1 9 1/16 1 3/4 12 7/8 4 3 1/16 7 1/4 41 3/4
  SD 29 1/2 13 3/8 10 5/8 2 9/16 2 3/16 1 5/16 4 3/4 3 3/16 9 3/16 3 3/16 5 3/8 1 9 1/16 1 3/4 12 7/8 4 3 1/16 7 1/4 31 7/8
PUMA 80 S 20 1/16 14 9/16 11 13/16 2 9/16 2 7/16 1 1/4 4 13/16 3 1/2 10 3 1/2 5 11/16 1 9 3/16 1 3/4 12 5 1/8 2 3/4 9 3/16 43 1/16
  SD 29 1/2 14 9/16 11 13/16 2 9/16 2 7/16 1 1/4 4 13/16 3 1/2 10 3 1/2 5 11/16 1 9 3/16 1 3/4 12 5 1/8 2 3/4 10 15/16 47
PUMA 110 S 19 11/16 16 9/16 13 3/4 3 1/8 3 1/8 1 9/16 5 1/2 3 3/4 10 1/2 3 3/4 6 5/16 1 12 13/16 1 7/8 18 1/8 3 3/4 4 15/16 3 15/16 39
  SD 29 1/2 16 9/16 13 3/4 3 1/8 3 1/8 1 9/16 5 1/2 3 3/4 10 1/2 3 3/4 6 5/16 1 12 13/16 1 7/8 18 1/8 3 3/4 4 15/16 3 15/16 42
PUMA 165 S 20 1/16 17 3/4 13 3/4 3 3/8 3 1/8 1 3/8 6 1/4 4 1/16 16 15/16 6 5/16 7 7/8 1 14 5/8 1 3/4 17 3/4 - 9 7/16 - 41 3/4
  SD 29 15/16 17 3/4 14 15/16 3 3/8 3 1/8 1 3/8 6 1/4 4 1/16 16 15/16 6 5/16 7 7/8 1 14 5/8 1 3/4 17 3/4 5 9/16 3 7/8 9 5/8 41 3/4
PUMA 220 S 20 1/16 17 3/4 14 3/4 3 3/8 3 1/8 1 3/8 6 3/8 3 15/16 17 1/8 5 15/16 7 13/16 1 3/16 - 1 3/16 19 - 13 - 39 7/8
  SD 31 1/2 17 3/4 14 3/4 3 3/8 3 1/8 1 3/8 6 3/8 3 15/16 17 1/8 5 15/16 7 13/16 1 3/16 - 1 3/16 19 4 15/16 7 7/8 8 1/2 39 7/8
Sizes in inches

Capacities based on a material resistance of 65,000 tensile.
- The manufacturer reserves the right to make modifications without prior notice 

Copyright ę 2015 Maquinaria GEKA S.A. All rights reserved.
Website developed by DMacroWeb using the tool DM Corporative
Social networks
Technical characteristics valid except for typographical errors or omissions.
Geka group, committed to continuous product improvement, may without notice change technical specifications, equipment and photographs of models, as well as any other information contained herein.
Share: Share on Facebook Share on Twitter Share on Google +1 Save into my Del.icio.us favorites Save to My Google Bookmarks Save to My Yahoo! favorites Send to MenÚame Share on your website
Learn:
Suscribe to newsletter: