Ironworker Machines with built-in Bending Station.

Bendicrop Series allows one or two operators to use these Ironworkers simultaneously in 6 Workstations: Punching, Notching, Shearing Flat Bars, Angle Cutting, Bars Shearing and built-in Bending Station.

Single Cylinder Hydraulic Ironworker with built-in bending station.

Two Cylinders Hydraulic Ironworker with built-in bending station.

Two Cylinders Hydraulic Ironworker with built-in bending station.

FEATURES	BENDICROP 50	BENDICROP 60	BENDICROP 85
PUNCHING
Punching Power	50 Ton	60 Ton	80 Ton
Maximum Capacity	(A) Ø 31 x 12 mm (B) Ø 27 x 13 mm	Ø 40 x 11 mm	Ø 40 x 15 mm
Throat Depth S / SD	177 mm	250 / 500 mm	300 / 500 mm
Working Height	973 mm	1106 mm	1094 mm
FLAT BARS SHEARING
Flatbar with slight deformation	350 x 10 mm (5º) 350 x 15 mm	350 x 15 mm (5º) 350×15 mm	450 x 15 mm (5º) 450×18 mm
Length of Blades	356 mm	356 mm	475 mm
Shear of one angle leg at 45º	70 mm	70 mm	–
Working Height	810 mm	859 mm	868 mm
ANGLES AND BARS CUTTING
L at 90º	80 x 80 x 8 mm	120 x 120 x 10 mm	120 x 120 x 10 mm
Round Bar	35 mm	45 mm	45 mm
Square Bar	30 mm	40 mm	40 mm
NOTCHING	Rectangular	Triangular	Triangular
Plate Thickness	10 mm	10 mm	12 mm
L of	100 mm	100 mm	130 mm
Depth	90 mm	–	–
Width	42 mm	–	–
BENDING STATION
Maximum Capacity	100 x 10 mm	150 x 10 mm	200 x 12 mm
GENERAL SPECIFICATIONS
Motor Power	3 kW	5,5 kW	9 kW
Strokes per minute	34 on 15 mm stroke	32 on 15 mm stroke	40 on 20 mm stroke
Maximun stroke	15 mm	20 mm	20 mm

Capacities based on a material resistance of 45 Kg/mm2.
GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
Technical characteristics valid except for typographical errors or omissions.
(A) Spain, Latin America, Denmark, Saudi Arabia and Africa. (B) Rest of World

Punching capacities
CALCULATOR.