Bendicrop 85, 2 Cylinder Hydraulic Ironworker with 2 Working Areas and built-in Bending Station.
Two Cylinder Universal Hydraulic Ironworker with 6 Workstations: Punching, Notching, Shearing Flat Bars, Angle Cutting, Bars Shearing and built-in Bending Station according to EC regulations.
Thanks to the blade holder’s vertical movement, machine has an excellent performance in all its six work stations:
- Punching.
- Rectangular Notching.
- Flat Bars Shearing.
- Angles and Solid Bars Shearing.
- Built-in Bending Station.
Fitted with an Anti Torsion System to reduce deformation when shearing Flat Bars.
Bendicrop 85 model is fitted with a touch and cut length stop and is delivered with two V-shaped Bending Dies of 50 mm and 90 mm.
2 Punching Throat versions available:
- S Version: 300 mm Standard Throat.
- SD Version: 500 mm Extended Throat.

FEATURES | BENDICROP 85 |
---|---|
Punching Power | 80 Ton |
Maximum capacity | Ø 40 x 15 mm |
Flat bars shearing | 450 x 15 mm (5º) 450 x 18 mm |
Angle shearing at 90º | 120 x 120 x 10 mm |
Bending | 200 x 12 mm |
Notching | 130 x 12 mm |
Bendicrop 85 features.

Anti-torsion system for flat bar shearing without distortion.

Permanent bending station is compliant with CE standards.

Flat bars shearing station with angle angle section cutting at 45º.

Angle Shearing, Rounds, and Square bar with minimum deformation.

Triangular Notching with Working Table. Also suitable for Pipe and Tube Notching, Rectangular Notching.

Goose neck die-holder for punching of UPN and IPN profiles sections on legs and webs. Quick Punch and Die changing