Two-Cylinder Hydraulic Ironworkers.

Hydracrop Series Ironworkers allows two operators to use these ironworkers simultaneously in 5 workstations: Punching, Notching, Shearing Flat Bars, Angle Cutting and Shearing Round and Square Bars.

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-55

Hydracrop 55 Ironworker

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-80

Hydracrop 80 Ironworker

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-110

Hydracrop 110 Ironworker

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-165

Hydracrop 165 Ironworker

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-220

Hydracrop 220 Ironworker

Hydracrop Series features:

FEATURES HYDRACROP 55 HYDRACROP 80 HYDRACROP 110 HYDRACROP 165 HYDRACROP 220
PUNCHING
Punching Power 55 Ton 80 Ton 110 Ton 165 Ton 220 Ton
Maximum Capacity with 
gooseneck die holder

Ø 40×10 mm
Ø 20×20 mm

Ø 40×14 mm
Ø 24×24 mm
Ø 40×20 mm
Ø 28×28 mm
Ø 40×30 mm
Ø 34×34 mm
Ø 40×40 mm
Throat Depth S/SD 250/500 mm 300/500 mm 300/610 mm 510/610 mm 385/475 mm
Working Height 1085 mm 1095 mm 1165 mm 1110 mm 1110 mm
FLAT BARS SHEARING
Flatbar with slight deformation 300×15 mm
200×10 mm
450×15 mm
300×20 mm
600×15 mm
400×20 mm
750×20 mm
400×30 mm
750×20 mm
400×30 mm
Length of Blades 305 mm 475 mm 605 mm 765 mm 765 mm
Working Height 880 mm 850 mm 960 mm 870 mm 870 mm
ANGLE CUTTING
Shearing Power 1100 kN 1500 kN 1800 kN 3000 kN 3000 kN
L at 90º Shear
without deformation
120x120x10 mm 130×130 x13 mm 152x152x13 mm 205x205x18 mm 205x205x18 mm
L at 45 º 70x70x7 mm 70x70x7 mm 70x70x7 mm 70x70x7 mm 70x70x7 mm
L at 90º Shear
with slight deformation 
(optional blade)
130x130x13 mm 152x152x13 mm 160x160x16 mm 205x205x25 mm 205x205x25 mm
SOLID BARS SHEARING
Round Bar 40 mm 45 mm 50 mm 60 mm 60 mm
Square Bar 40 mm 45 mm 50 mm 60 mm 60 mm
UPN Profiles
(optional blade)
120 mm 140 mm 160 mm 180 mm 180 mm
IPN Profiles
(optional blade)
120 mm 140 mm 160 mm 180 mm 180 mm
NOTCHING
Plate Thickness 10 mm 12 mm 13 mm 16 mm 16 mm
L of 100 mm 100 mm 100 mm 120 mm 120 mm
Depth 90 mm 90 mm 90 mm 110 mm 110 mm
Width 42 mm 52 mm 52 mm 58 mm 58 mm
GENERAL SPECIFICATIONS
Motor Power 5 kW 9 kW 9 kW 15 kW 15 kW
Strokes per minute
(on 20 mm. stroke)
37 40 28 31 26
Maximun Stroke 60 mm 70 mm 80 mm 100 mm 100 mm
  • Capacities based on a material resistance of 45 Kg/mm2.
  • GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
  • Technical characteristics valid except for typographical errors or omissions.

Punching capacities
CALCULATOR.