Home 9 Bendicrop Series 9 Bendicrop 85

Bendicrop 85 Ironworker Machines for Punching, Shearing and Bending

Two-cylinder universal hydraulic punching, shearing and bending ironworker with 6 workstations: Punching, Notching, Shearing Flat Bars, Angle Cutting, Bars Shearing and built-in Bending Station according to EC regulations.

Bendicrop 85 is the most powerful punching, shearing and bending machine Geka’s Bendicrop series of ironworker machines. It features a blade holder with a vertical movement that provides an excellent performance when bending and shearing.

Additionally, its anti-torsion system reduces deformation when performing shearing tasks over flat bars. A touch and cut length stop is fitted within this punching and bending machine, it is delivered with two V-shaped Bending Dies of 50 mm and 90 mm.

Bendicrop 85 workstations

There are six workstations that can complete different tasks such as punching, shearing and bending. These are:

  • Punching station
  • Triangular Notching station
  • Flat Bars Shearing station
  • Angles shearing station
  • Solid Bars Shearing station
  • Built-in bending station

Bendicrop 85 versions

This punching machine has two punching throat versions available:

  • S Version: 300 mm Standard Throat.
  • SD Version: 500 mm Extended Throat.

Bendicrop 85 capacities

FEATURESBENDICROP 85
Punching Power80 Ton
Maximum capacityØ 40 x 15 mm
Flat bars shearing450 x 15 mm
(5º) 450 x 18 mm
Angle shearing at 90º120 x 120 x 10 mm
Bending200 x 12 mm
Notching130 x 12 mm
  • Capacities based on a material resistance of 45 Kg/mm2.
  • GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
  • Technical characteristics valid except for typographical errors or omissions.

Bendicrop 85 features

Geka-sistema-antitorsion-bendicrop

Anti-torsion system for flat bar shearing without distortion.

Geka-estacion-plegado-bendicrop

Permanent bending station is compliant with CE standards.

Geka-corte-llantas-bendicrop

Flat bars shearing station with angle angle section cutting at 45º.

Geka-cuchillas-corte-bendicrop

Angle Shearing, Rounds, and Square bar with minimum deformation. 

geka-entallado-triangular-bendicrop

Triangular Notching with Working Table. Also suitable for Pipe and Tube Notching, Rectangular Notching.

Punzonado UPN en Bendicrop
Goose neck die-holder for punching of UPN and IPN profiles sections on legs and webs. Quick Punch and Die changing
Share This