Hydracrop Series of Two-cylinder Ironworker Machines

Home 9 Hydracrop Series

Hydracrop Series ironworker machines allow two operators to use these ironworkers simultaneously in 5 workstations, each of them dedicated to different ironworking tasks: punching, notching, shearing flat bars, angle cutting and shearing round and square bars.

There are 5 two-cylinder metal punching machines within the Hydracrop series, the number on their name reflects their punching power in tons. These are: Hydracrop 55, 80, 110, 165 and 220. They all have two versions, S and SD. The S version has a standard throat and the SD one has an extended throat.

Hydracrop Ironworker machines’ stations features

These Ironworker machines have 5 working stations, each of them is devoted to a different ironworking task: Punching, flat bars shearing, bars cutting, notching and angle shearing. The capability of the workstations may vary depending on the model, but their common features are:

  • Punching station: Independent guided punching cylinder that includes an anti-rotation mechanism and the possibility for optional or customized tools to be installed
  • Flat bars shearing station: Cutting in a progressive manner with minimal distortion. Cutting angles capacity in the flat bars station
  • Bars cutting station: Shearing of solid round and square bars and a variety of profiles, such as UPN, UPE, IPN, and IPE
  • Notching station: Rectangular Notching Station with tube or triangle notching as an option
  • Angle shearing station: This station can perform angle cutting tasks without deformation or material loss by using a patented rectilinear motion technology
Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-55

Hydracrop 55 Ironworker

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-80

Hydracrop 80 Ironworker

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-110

Hydracrop 110 Ironworker

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-165

Hydracrop 165 Ironworker

Geka-cizallas-punzonadoras-dos-cilindros-hidracrop-220

Hydracrop 220 Ironworker

Hydracrop series capacity

The features and capacities of the Hydracrop series may be observed in the following table:

FEATURESHYDRACROP 55HYDRACROP 80HYDRACROP 110HYDRACROP 165HYDRACROP 220
PUNCHING
Punching Power55 Ton80 Ton110 Ton165 Ton220 Ton
Maximum Capacity with 
gooseneck die holder

Ø 40×10 mm
Ø 20×20 mm

Ø 40×14 mm
Ø 24×24 mm
Ø 40×20 mm
Ø 28×28 mm
Ø 40×30 mm
Ø 34×34 mm
Ø 40×40 mm
Throat Depth S/SD250/500 mm300/500 mm300/610 mm510/610 mm385/475 mm
Working Height1085 mm1095 mm1165 mm1110 mm1110 mm
FLAT BARS SHEARING
Flatbar with slight deformation300×15 mm
200×10 mm
450×15 mm
300×20 mm
600×15 mm
400×20 mm
750×20 mm
400×30 mm
750×20 mm
400×30 mm
Length of Blades305 mm475 mm605 mm765 mm765 mm
Working Height880 mm850 mm960 mm870 mm870 mm
ANGLE CUTTING
Shearing Power1100 kN1500 kN1800 kN3000 kN3000 kN
L at 90º Shear
without deformation
120x120x10 mm130×130 x13 mm152x152x13 mm205x205x18 mm205x205x18 mm
L at 45 º70x70x7 mm70x70x7 mm70x70x7 mm70x70x7 mm70x70x7 mm
L at 90º Shear
with slight deformation 
(optional blade)
130x130x13 mm152x152x13 mm160x160x16 mm205x205x25 mm205x205x25 mm
SOLID BARS SHEARING
Round Bar40 mm45 mm50 mm60 mm60 mm
Square Bar40 mm45 mm50 mm60 mm60 mm
UPN Profiles
(optional blade)
120 mm140 mm160 mm180 mm180 mm
IPN Profiles
(optional blade)
120 mm140 mm160 mm180 mm180 mm
NOTCHING
Plate Thickness10 mm12 mm13 mm16 mm16 mm
L of100 mm100 mm100 mm120 mm120 mm
Depth90 mm90 mm90 mm110 mm110 mm
Width42 mm52 mm52 mm58 mm58 mm
GENERAL SPECIFICATIONS
Motor Power5 kW9 kW9 kW15 kW15 kW
Strokes per minute
(on 20 mm. stroke)
3740283126
Maximum Stroke60 mm70 mm80 mm100 mm100 mm
  • Capacities based on a material resistance of 45 Kg/mm2.
  • GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
  • Technical characteristics valid except for typographical errors or omissions.

Punching capacities
CALCULATOR.

Share This