Home 9 Hydracrop Series 9 Hydracrop 55

Geka Hydracrop 55 Ironworker Machines

2 Cylinders Hydraulic Ironworker machine with 2 Working Areas and 5 workstations.

Hydracrop 55 is a punching, angle cutting and shearing machine that is part of Geka´s two-cylinder Ironworker machines Hydracrop series.

Hydracrop 55 is an Ironworker machine with 2 Cylinders. This means that it can be used by two workers at the same time to complete two different Ironworking tasks such as punching and shearing at once. Hydracrop 55 also has 5 different workstations for each ironworking tasks that it can complete:

  • Punching station
  • Angle shearing.
  • Flat bars shearing.
  • Bars cutting.
  • Notching.

Hydracrop 55 versions

Hydracrop 55 has 2 versions that differ on the dimensions of its punching throat, these are:

  • S Version: 250 mm Standard Throat.
  • SD Version: 500 mm Extended Throat.

Hydracrop 55 capacity

Hydracrop 55´s features and capacities can be observed in the following table:

FEATURESHYDRACROP 55
Punching Power55 Ton
Maximum capacityØ 40 x 10 mm
Ø 20 x 20 mm
Shearing of Angles at 90º120 x 120 x 10 mm
Shearing of Flat Bars300 x 15 mm
200 x 20 mm
Shearing of Round Bars40 mm
Shearing of Square Bars40 mm
Rectangular Notching90 x 42 x 10 mm
  • Capacities based on a material resistance of 45 Kg/mm2.
  • GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
  • Technical characteristics valid except for typographical errors or omissions.

Hydracrop 55´s workstations features

geka-hydracrop-estacion-punzonado-mesa

Punching Station
Independent guided punching cylinder with anti-rotation mechanism and room for optional or customized tools to be installed.

geka-hydracop-estacion-corte-llantas-pletinas

Flat Bars Shearing Station
Cutting in a progressive manner with minimal distortion. Cutting angles in flat bars station is possible.

geka-hydracrop-estacion-corte-barras

Bars Cutting Station
Shearing of solid round and square bars and a variety of profiles, such as UPN, UPE, IPN, and IPE.

geka-hydracrop-estacion-entallado-rectangular

Notching Station
Rectangular Notching Station with notching of tubes or triangles as an option.

geka-hydracrop-estacion-corte-angulos-perfiles

Angle Shearing Station
Cutting angles without deformation or material loss with a patented rectilinear motion system.

Share This