Home 9 Hydracrop Series 9 Hydracrop 165

Hydracrop 165 Ironworker Machines for Cutting and Shearing

2 Cylinders Hydraulic ironworker machine with 2 working areas and 5 workstations.

Hydracrop 165 is one of Geka´s two-cylinder Ironworker machines Hydracrop series. This machine can punch, notch, cut and shear different metals such as steel. It has a punching power of 165 tons.

Hydracrop 165 workstations

Hydracrop 165 is an Ironworker with two cylinders, this means that there are two working areas that can be used simultaneously. As a result, you can perform punching, cutting and shearing tasks at the same time. The 5 workstations included in Hydracrop 165 are the following ones:

  • Punching.
  • Angle shearing.
  • Flat bars shearing.
  • Bars cutting.
  • Notching.

Geka Hydracrop 165 versions

There are 2 Punching Throat versions available:

  • S Version: 510 mm Standard Throat.
  • SD Version: 610 mm Extended Throat.

Hydracrop 165 capacities

The capacities of the Hydracrop 165 are the following:

FEATURESHYDRACROP 165

 

Punching Power

165 Ton
Maximum capacityØ 40 x 30 mm
Ø 34 × 34 mm

 

Shearing of Angles at 90º

205 x 205 x 18mm
Shearing of Flat Bars750 x 20 mm
400 x 30 mm
Shearing of Round Bars60 mm
Shearing of Square Bars60 mm
Rectangular Notching90 x 58 x 16 mm
  • Capacities based on a material resistance of 45 Kg/mm2.
  • GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
  • Technical characteristics valid except for typographical errors or omissions.

Hydracrop 165 features

geka-hydracrop-estacion-punzonado-mesa

Punching station
The punching cylinder is independently guided an equipped with an anti-rotation system. It also has space available to instal optional or customized tools.

geka-hydracop-estacion-corte-llantas-pletinas

Flat bars shearing station
It can do progressive cutting and shearing tasks with minimum deformation over flat bars. Possibility of cutting angles in its angle shearing station.

geka-hydracrop-estacion-corte-barras

Bars cutting station
Shearing of Solid Round and Square Bars over UPN, UPE, IPN or IPE profiles with multiple options.

geka-hydracrop-estacion-entallado-rectangular

Notching station
Rectangular Notching Station with table included. Triangular or tube notching is an option.

geka-hydracrop-estacion-corte-angulos-perfiles

Angle shearing station
Patented rectilinear motion system for cutting angles without deformation or loss of material.

Share This